| Ögussa Classification | DIN EN 29453 | Solder Temperature | Melting Range | Key Applications |
| Silox® 220 | S-Sn97Ag3 | 270 °C | 221 - 230°C | Special soft solder for drinking water pipes, hot water pipes and heating systems Hot water-resistant up to 110°C |
| Silox® 260 | S-Sn97Cu3 | 300 °C | 230 - 250°C | Special soft solder for copper pipes in sanitary use, approved for drinking water and solar collectors up to a stagnation temperature of 200°C and pressure of 6 bar |
Delivery form: 250 g manual solder coils
| Ögussa Classification | DIN EN 29454-1 | Temperature | Residues | Key Applications |
| Degufit 3000 | 3.1.1. | Melting range: 230 - 250°C | Water-soluble | For very careful solder joints |
| Soldaflux 7000 | 3.1.1. | Working temperature range: 150 - 400°C | Water-soluble | Fine solder joints |
Delivery form:
Degufit 3000: 250 g can with brush
Soldaflux 7000: 100 g can with brush
| Ögussa Classification | Dimensions | Packaging Unit | Features | Key Applications |
| Cleaning fleece | 130 x 60 mm | 10 units | Metal-free | For cleaning pipe ends of copper pipes |
| Heat protection mat | 330 x 500 mm | 1 unit | Asbestos-free | Protects the surroundings from the scattered flame and is temperature-resistant from 300°C to 1000°C for a short time |
| Ögussa Classification | DIN EN ISO 3677 | Solder Temperature | Melting Range | Key Applications |
| 4576 | B-Ag45CuZnSn-640/680 | 670 °C | 640 - 680 °C | Copper pipe installation in the area of heating systems and technical technical gases Hygienically harmless Drinking water and process water only if specified by the client, as there may be an increased risk of corrosion, depending on the water quality |
| 4404 | B-Ag44CuZn- 675/735 | 730 °C | 675 - 735 °C | |
| 3476 | B-AgCu36AgZnSn-630/730 | 710 °C | 630 - 730 °C |
Delivery form: Rods, blank flux-coated rods, BrazeTec CoMet 4576-U, 4404-U and 3476-U *)
*) In the case of flux-coated hard silver solder rods, the solder joint must always be additionally coated with Ögussa BrazeTec flux before soldering.
| Ögussa Classification | DIN EN 1045 | Working Temperature Range | Key Applications |
| h paste | FH 10 | 550 - 800 °C | Universal flux for heavy metals, flux residues are corrosive and should be removed carefully, water-soluble |
Universal flux for heavy metals. Flux residues are corrosive and should be removed carefully. Water-soluble.
| Ögussa Classification |
DIN EN ISO 3677 | Solder Temperature | Melting Range | Key Applications |
| 1500 P | B-Cu80AgP-645/800 | 710 °C | 645 - 800 °C | Copper pipe installation in the area of heating systems and technical and medical gases Hygienically harmless |
| 500 P | B-Cu89PAg-645/815 | 710 °C | 645 - 815 °C | |
| 200 P | B-Cu92PAg-645/825 | 710 °C | 645 - 825 °C |
CAUTION!
Do not use phosphorous solders with sulphurous media or with Fe and Ni alloys.
When soldering medical gases, only solders that contain phosphorous should be used, as these are processed with no flux when joining copper to copper. Fluxes and appropriate silver solders without phosphorous may be used only for soldering e.g. brass or gunmetal wall plates to copper pipes. During soldering, reducing inert gas must channelled through be pipes and the gas flow must be guaranteed.
