High-tech equipment and components are barely conceivable without precious metals. Smaller mobile phones, smaller computers, more power in less space. Ögussa commercial plating's mission and commitment is to achieve the highest quality combined with sparing use of resources. The comprehensive work spectrum covers purely technical applications as well as classical decorative coatings. This area has been developed intensively over the last few years.

The finishing of components generally comes at the end of the production chain. Because of this, problems frequently arise which could easily have been prevented with a structure "suitable for plating". Is the component suitable for a drum or has it been developed as rack goods?

Drum goods, especially small and very small parts, can be coated very economically because the goods carrier need not be fitted with threading wires or pins.

Not every geometry is suitable for this type of manufacture; in this case contact zones can be provided in defined areas which allow quick and economical fitting. Holes and internal threads are especially suitable for ensuring process safety during the desired bath sequence. The bath sequence is obtained from the desired layer structure .

At porous soldered joints between hollow bodies there is the risk of penetration from the degreasing bath and then the electrolyte. The sensitive high-performance electrolyte can be destroyed. Liquid generally diffuses through these pores a long time after the plating and becomes noticeable as a result of unsightly spot formation (sweating)